➜ How To Setup Scarlett 2i2 with FL Studio

Having the right setup and equipment is essential to producing quality music.

Scarlett 2i2 is an audio interface that allows you to easily record and mix audio.

FL Studio is a popular digital audio workstation used by producers, musicians, and songwriters.

In this blog post, we’ll show you step-by-step how to setup Scarlett 2i2 with FL Studio.

Whether you’re a beginner or a seasoned pro, this guide will walk you through the process of setting up your Scarlett 2i2 to work with FL Studio.

We’ll discuss topics such as what hardware and software you need, how to connect the Scarlett 2i2 to your computer, and how to configure FL Studio for optimal performance.

We’ll also provide some helpful tips and troubleshooting advice to help you get the most out of your experience.

So, let’s get started!

Install the Scarlett 2i2 Drivers

The first step in setting up your Scarlett 2i2 with FL Studio is to install the drivers.

This will allow your computer to recognize the Scarlett 2i2 and allow it to properly communicate with FL Studio.

To get started, head to the Focusrite website and download the latest drivers for your Scarlett 2i2.

Once the download is complete, run the driver setup and follow the instructions to complete the installation.

When the setup is complete, you are ready to move onto the next step.

Connect the Scarlett 2i2 to your computer

The next step when setting up your Scarlett 2i2 with FL Studio is to connect the Scarlett 2i2 to your computer.

First, plug the USB cable provided into the USB port on the Scarlett 2i2 and the other end into a USB port on your computer.

Once the cable is in, turn on the Scarlett 2i2 by pressing the power button.

Your computer should automatically detect the Scarlett 2i2 and recognize it as a new audio device.

Launch FL Studio

Once you’ve installed and connected your Scarlett 2i2 to your computer, you’re ready to launch FL Studio.

Open up the software and select the Scarlett 2i2 as your audio input device.

You may need to adjust the input level on the Scarlett 2i2 to get the best sound possible.

Additionally, you should make sure that your microphone is connected and the correct input is selected in FL Studio.

Once all the settings are correct, you can start tracking and recording your music.

Open the Audio Settings panel

After connecting your Scarlett 2i2 to your computer, open the audio settings panel by navigating to the top menu bar and selecting “Options” then “Audio Settings”.

In the audio settings panel, select “Scarlett 2i2” as the driver type.

You can also adjust the sample rate here.

Make sure it is set to a rate of 44100 Hz or higher.

After making the proper changes, click the “OK” button at the bottom of the window.

Select ‘2i2’ from the ‘Audio Interface’ dropdown

Once you have connected your Scarlett 2i2 correctly, you will need to select it in FL Studio.

To do so, open FL Studio and go to Options>Audio Settings.

Under the ‘Device’ dropdown, select ‘Focusrite USB ASIO’.

Next, select ‘2i2’ from the ‘Audio Interface’ dropdown.

This will ensure that FL Studio is using the Scarlet 2i2 as its primary audio interface.

Click ‘OK’ and you have successfully set up your Scarlett 2i2 with FL Studio.

Set ‘Input Latency’ to 0.5 ms

The next step on setting up your Scarlett 2i2 with FL Studio is to set the ‘Input Latency’ to 0.

5 ms.

This setting is important to ensure that all your audio inputs and outputs are correctly synchronized.

To adjust this setting, start by opening the ‘Options’ menu in FL Studio.

From there, select the ‘Audio Settings’ tab.

Finally, set the ‘Input Latency’ to 0.

5 ms in the ‘Advanced Settings’ section.

Once you’ve applied the changes, your Scarlett 2i2 should be properly connected to your FL Studio and ready to use.

Set ‘Output Latency’ to 0.5 ms

Setting the Output Latency on Scarlett 2i2 with FL Studio is a simple but important step.

To do so, go to the ‘Options’ menu in FL Studio, select ‘Audio Settings’, then select the ‘Device’ tab.

From here, select ‘Scarlett 2i2’ as the audio device and set the Output Latency to 0.5 ms.

This will ensure that your audio is recorded and outputted with minimal latency, giving you a better overall experience.

Hit the ‘Refresh’ button and select ‘2i2’ again

The next step is to hit the ‘Refresh’ button and select ‘2i2’ again.

This will tell FL Studio to use the Scarlett 2i2 as its Audio Out device.

You should now be able to hear your music through your speakers or headphones.

If you’re experiencing any issues with sound, make sure your Scarlett 2i2 is connected and powered on and that you’ve selected the correct Audio Out device in FL Studio.